High platinum utilization for proton exchange membrane fuel cells via low-temperature substrate sputtering on acid-treated carbon nanotube sheet

초록

Low-temperature substrate sputtering on an acid-treated carbon nanotube (ATCNT) sheet result in high platinum (Pt) utilization. A thin catalyst layer (CL, similar to 300 nm) with a high density of Pt and vacancies was formed on the ATCNT sheet (Pt-deposited ATCNT). It replaced the commercial carbon-supported Pt and microporous layers of the proton exchange membrane fuel cells. The substrate temperature (Tsub: 20, 5, -10, -30, and -50 degrees C) contributed to crack formation in the porous Pt thin film and restrained the growth of Pt grain (average grain size from 8.60 to 3.97 nm). Below -10 degrees C, the crack and grain size changed significantly. The increased crack and smaller grain size enlarged the Pt surface area while forming vacancies; this was confirmed via physical and electrochemical characterizations. When compared to Pt-deposited ATCNT (Tsub = 20 degrees C, 47.61 m2 g-1Pt), the electrochemical surface area of Pt-deposited ATCNT (Tsub = -50 degrees C, 72.06 m2 g-1Pt) increased by 51.35%. We present a high Pt mass-specific peak power density (5.93 kW g-1Pt), focusing on a strategy to increase Pt utilization.

키워드