Retrofitting performance of precast UHPC jackets and NSM GFRP bars in pre-damaged RC columns with deficient lap splices

초록

Fiber-reinforced polymer (FRP) jackets and the near surface-mounted (NSM) technique have been widely used to improve the seismic performance of intact reinforced concrete (RC) columns with deficient lap splices. For damaged lap-spliced RC columns, use of ultra-high-performance concrete (UHPC) jackets is more powerful in eliminating the bond splitting failure and recovering the stiffness than FRP jackets. This study proposed an L-shape precast steel-reinforced UHPC (PR-UHPC) jacket to improve the retrofit performance of conventional cast-in-place (CIP) and precast UHPC jackets. Further, PR-UHPC jackets were combined with NSM GFRP bars to develop an innovative method. Cyclic loading tests were performed on three three-fourths scaled deficient lap-spliced RC columns. One intact column was directly retrofitted with PR-UHPC jackets, while the other two were first damaged and then retrofitted with PR-UHPC jackets and the combination of PR-UHPC jackets and NSM GFRP bars, respectively. To investigate the effects of UHPC details and NSM bar types, a previous study on lap-spliced RC columns retrofitted with CIP plain UHPC jackets and NSM steel bars was incorporated. The test results indicate that the retrofitted columns failed with rebar fracture, and plastic hinge shifting was prevented. The peak load, effective yield stiffness, and ultimate drift ratio of the retrofitted columns were 29 similar to 50 %, 37 similar to 39 %, and 126 similar to 165 % higher than those of the unretrofitted columns, respectively. NSM GFRP bars outperformed steel bars in terms of residual drift ratio control. The numerical model well predicted the cyclic behavior by addressing the pre-damage effect and the actual confinement of PR-UHPC jackets. The parametric study revealed that the increase of PR-UHPC jacket width effectively improved the strength and stiffness, while the pre-damage degree had a minor effect. The recommended UHPC jacket height for the present columns was 2.5 times the plastic hinge length. Finally, a design method was developed for the UHPC jacket width.

키워드