Experimental investigation of charge transfer coefficient and exchange current density in standard fuel cell model for polymer electrolyte membrane fuel cells

Citations

WEB OF SCIENCE

9
Citations

SCOPUS

11

초록

Two representative parameters, exchange current density (j0) and charge transfer coefficient (α), in a standard fuel cell model of polymer electrolyte membrane fuel cells (PEMFCs) were experimentally investigated. The polarization characteristics and the corresponding electrochemical impedance spectra of the normal PEMFCs were measured and Tafel curves were calculated from them, where j0 and ? were finally calculated. As a result, the calculated j0 was 0.11- 0.70 A/cm2, while the α was 0.056-0.023, depending on the operating temperature. Here, the j0 is extremely overestimated while α is underestimated as compared with those in literature. Although the reason for such difference is not clear, it is expected that it could affect the predicted performance by the model significantly if the fuel cell performance is improved highly in the future so the activation overvoltage corresponding to identical current is lowered. © 2020, Korean Institute of Chemical Engineering (KIChE).

키워드

Charge Transfer Coefficient; Electrochemical Impedance Spectroscopy; Exchange Current Density; Fuel Cell Model; Polymer Electrolyte Membrane Fuel Cell
제목
Experimental investigation of charge transfer coefficient and exchange current density in standard fuel cell model for polymer electrolyte membrane fuel cells
저자
Lee H.; Han C.; Park T.
DOI
10.1007/s11814-020-0476-7
발행일
2020-04
유형
Article
저널명
Korean Journal of Chemical Engineering
권
37
호
4
페이지
577 ~ 582